產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
5.0" 40-pin 800x480 TFT Display without Touchscreen（ada1680）5.0" 40 針 800x480 TFT 顯示器，無觸摸屏
5.0" 40-pin TFT Display - 800x480 with Touchscreen (14:20)
影片：https://youtu.be/PsfHcXO7IAI
Description
This 5.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability.／這這個 5.0" TFT 屏幕有很多像素，準確地說是 800x480，一個 LED 背光和一個電阻式觸摸屏覆蓋層。當您需要大量空間用於圖形或用戶界面時，它非常適合。這些屏幕在消費電子產品中很常見，如微型電視、GPS、掌上游戲車載顯示器等。40 針連接器有 8 個紅色、8 個綠色和 8 個藍色平行針，用於 24 位顏色功能
This version does not have touchscreen attached It's exactly the same TFT display as PID 1596 but without the resistive touch panel so it is a little less expensive. 此版本附有 4 線電阻式觸摸屏 。與 PID 1680 相同的 TFT 顯示屏，但帶有電阻式觸摸面板，因此價格稍貴。
This is a "raw pixel-dot-clock" display and does not have an SPI/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a constant-current mode boost converter that can go as high as 24V instead of our other small displays that can run the backlight off of 5V.／這是一個「原始圖元點時鐘／原始像素點時鐘」顯示器，沒有 SPI/並行類型控制器或任何類型的 RAM。顯示器應該以 60Hz 的頻率不斷刷新，具有像素時鐘、V 同步、H 同步等。有一些高端處理器（例如 BeagleBone 中使用的處理器）可以原生支持此類 RGB TTL 顯示器。然而，支持它的小型微控制器極為罕見，因為您需要專用硬件或非常快的處理器，例如 FPGA。不僅如此，背光還需要一個恆流模式升壓轉換器，它可以高達 24V，而不是我們其他可以在 5V 下運行背光的小型顯示器．
For that reason, we are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That's the best way to interface this display to just about any microcontroller (including Arduino & friends) If you want to control with from an HDMI or DVI output, check out our TFP401 driver board. If you are an advanced electronics enthusiastyou can try wiring this directly to your processor, but it we don't have any support or tutorials for that purpose.／出於這個原因，我們僅將它作為商店中 Adafruit RA8875 驅動板的伴侶攜帶，該芯片可以在後台處理巨大的視頻 RAM 和時序要求。這是將此顯示器連接到幾乎任何微控制器（包括 Arduino 和朋友）的最佳方式如果您是高級電子愛好者，您可以嘗試將其直接連接到您的處理器，但我們沒有任何支持或教程.
Technical Details
