產品說明0
※本產品原廠代理從國外進口,有些交期較長,下訂前請詢問!
The HD-1810MG digital servo from Power HD is a miniature servo with digital control electronics for increased performance. The output shaft is supported by a ball bearing, and the gear train and part of the case are metal for increased durability. Servo horns and associated hardware are included.
Key specs at 6 V: 0.13 sec/60°, 54 oz-in (3.9 kg-cm), 16 g.
The HD-1810MG is a great, high-performance actuator for small mechanisms. Digital electronics coupled with mostly metal gears and a ball bearing give this servo a distinct edge over similarly sized servos. The lead is terminated with a standard “JR”-style connector, which is Futaba-compatible. The pictures below show the metal gear train and an example of the hardware that might be included with this servo (hardware might vary).
Dimensions
Size: | 22.8 x 12 x 29.4 mm |
Weight: | 16 g |
General specifications
Digital?: | Y |
Free-run current @ 6V: | 240 mA |
Stall current @ 6V: | 1400 mA |
Speed @ 6V: | 0.13 sec/60° |
Stall torque @ 6V: | 3.9 kg·cm |
Speed @ 4.8V: | 0.16 sec/60° |
Stall torque @ 4.8V: | 3.1 kg·cm |
Lead length: | 10 in |
Hardware included?: | Y |
You can find more information about this servo under the specifications tab and in its datasheet (117k pdf).
Note that, as with most hobby servos, stalling or back-driving this servo can strip its gears.
File downloads
- Datasheet for the Power HD mini digital servo HD-1810MG (117k pdf)