※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

MI:pro Protector Case for micro:bit V2 (PRT-17867)

SparkFun原廠 micro:bit V2 壓克力外殼 D款 (不含主板BBC 1、2代) (PRT-17867)

參考影片: https://youtu.be/EJTBjh9l-ck

• Dimensions:
  
  • 長度 Length: 65mm.
    
  • 寬度 Width: 37mm.
    
  • 深度 Depth (without screws 不帶螺絲 ): 12mm.
    
  • 深度 Depth (with screws 帶螺絲 ): 18.5mm.
    
• Provides excellent protection to the BBC micro:bit whilst allowing access to the bottom pins.
  
• Full access to the A and B buttons on the BBC micro:bit.
  
• Attach a battery cage to the rear of the case with the supplied sticky fixer.
  
• Full access to pins and connections including the micro USB connector.
  
• Clear case material shows the on-board LEDs in perfect clarity.
  
• The case is compatible with versions 1 and 2 of the micro:bit.
   該外殼與micro：bit的版本1和2兼容。
• When used in conjunction with a battery holder, micro:bit projects can be fully mobile.
  當與電池座配合使用時，micro：bit項目可以完全移動。

DESCRIPTION
This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the case while still providing access to all buttons and ports on the micro:bit. Though these cases do protect the micro:bit astoundingly well, the biggest benefit of using the MI:pro is to not accidentally short out the pads on the back of the micro:bit.
BBC micro：bit的MI：pro保護殼設計用於原始的micro：bit V1和micro：bit V2。這些外殼採用四層構造樣式，能夠將2xAAA電池組安裝到外殼的背面，同時仍可訪問micro：bit上的所有按鈕和端口。儘管這些情況確實可以很好地保護micro：bit，但使用MI：pro的最大好處是不會意外使micro：bit背面的焊盤短路。

　　　　Construction is simple, requiring only a small flathead screwdriver (at most), and involves layering each plate on top of one another around the micro:bit and screwing it into place. Luckily, the MI:pro Protector case enables easy access to the edge pins at the bottom of the micro:bit, allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI:pro case is the SparkFun gamer:bit due to its edge connector being located in the center of the board.
施工很簡單，只需要一個小平頭螺絲刀即可（最多），並且需要將每個板圍繞微型鑽頭一層一層地層疊起來並擰緊到位。幸運的是，MI：pro保護器盒可輕鬆檢修micro：bit底部的邊緣引腳，從而仍可將其插入我們許多載板上的邊緣連接器中。不能與MI：pro外殼一起使用的唯一板子是SparkFun gamer：bit，因為其邊緣連接器位於板子的中央。

　　Note: The MI:pro Protector case only includes the parts found in the Includes Tab. This case does NOT include a micro:bit, power source or mounting screws. These items will need to be purchased separately.
　　注意： MI：pro Protector保護套僅包含在“包含”選項卡中找到的零件。這種情況下不包括電源或安裝螺絲。這些物品將需要單獨購買。