產品說明0
※本產品原廠代理從國外進口,有些交期較長,下訂前請詢問!
型號:B0249,Arducam 12MP IMX477攝像機HQ Camera+6mm CS鏡頭,適用 NVIDIA Jetson Nano/NX、Pi CM3/3+/4 可用
Arducam High Quality Camera, 12.3MP 1/2.3 Inch IMX477 HQ Camera Module with 6mm CS-Mount Lens for Jetson Nano,Xavier NX and Raspberry Pi Compute Module CM4, CM3, CM3+
Arducam 高品質相機,12.3MP 1/2.3 英寸 IMX477 HQ 相機模塊,帶 6 毫米 CS 接口鏡頭,適用於 Jetson Nano,Xavier NX 和 Raspberry Pi 計算模塊 CM4、CM3、CM3+
PS.該相機目前無法在 AGX Xavier 上使用。
Arducam just released this High Quality camera module for Jetson Nano/Xavier NX/Raspberry Pi Compute Module CM4, CM3, CM3+, an IMX477 camera board with three hole pitches, a 6mm CS lens.The customers can use this camera module on Jetson Nano/Xavier NX/Raspberry Pi Compute Module CM4, CM3, CM3+ natively with hardware ISP features.
Arducam 剛剛發布了用於 Jetson Nano/Xavier NX/Raspberry Pi 計算模塊 CM4、CM3、CM3+、具有三個孔距的 IMX477 攝像頭板、一個 6mm CS 鏡頭的高品質攝像頭模塊。客戶可以在 Jetson Nano/上使用此攝像頭模塊Xavier NX/Raspberry Pi 計算模塊 CM4、CM3、CM3+ 本身俱有硬件 ISP 功能。
★ KERNEL CAMERA DRIVER USED/使用內核攝像頭驅動
This camera relies on kernel drivers to work – one kernel version, one camera driver.
- Versions earlier than JetPack 4.3 (L4T 32.3.1) are not supported.
- Up or downgrading your OS leads to a kernel bump, and you’ll need to re-install a matching driver.
- Future JetPack/kernel updates require future drivers. When that happens, please allow us some time to process. And if you don’t see it released in time, kindly remind us.
該相機依賴於內核驅動程序來工作——一個內核版本,一個相機驅動程序。
- 不支持 JetPack 4.3 (L4T 32.3.1) 之前的版本。
- 升級或降級您的操作系統會導致內核崩潰,您需要重新安裝匹配的驅動程序。
- 未來的 JetPack/內核更新需要未來的驅動程序。發生這種情況時,請給我們一些時間來處理。如果您沒有看到它及時發布,請提醒我們。
- 1 pcs 12.3MP IMX477 color camera module
- 1 pcs 6mm focal length CS-mount camera lens
- 1 pcs 80mm/3.15inch 22pin camera cable
- 1 pcs 300mm/12inch 15pin to 22pin camera cable
【Features】特徵
- For the new version(R32 4.4), please refer to the following link: link:https://github.com/ArduCAM/MIPI_Camera/releases/tag/v0.0.2
- Get Clearer Images: This camera adopts 1/2.3" 12.3 Megapixel IMX477 sensor for sharp image, max. still resolution 4056(H) x 3040(V).
- Less Hassle: No more wasting time looking for the CS lens and camera case. A 1/2.3" 6mm focal length CS lens is included.
- More Lanes: The Arducam high quality camera module has a 4-lane MIPI CSI-2 interface to make it possible to get more data through.
- Support More Platforms: It supports all Raspberry Pi camera models. Pi 4, Pi 3/3B+/3A+, CM3/3+, Pi Zero, and more. For Nvidia Jetson Nano and Xavier NX, you can search for B0249 / B0250 to get the Jetson camera bundle. For PC /laptop, you could purchase the HQ UVC camera module B0280 (with 6mm CS Mount Lens) or B0288 (with Varifocal C Mount Lens) directly.
- 新版本(R32 4.4)請參考以下鏈接:鏈接:https://github.com/ArduCAM/MIPI_Camera/releases/tag/v0.0.2
- 獲得更清晰的圖像:該相機採用 1/2.3" 12.3 兆像素 IMX477 傳感器以獲得清晰的圖像,最大靜止分辨率 4056(H) x 3040(V)。
- 減少麻煩:不再浪費時間尋找 CS 鏡頭和相機包。包括一個 1/2.3" 6mm 焦距 CS 鏡頭。
- 更多通道:Arducam 高質量相機模塊具有 4 通道 MIPI CSI-2 接口,可以通過更多數據。
- 支持更多平台:支持所有樹莓派相機型號。Pi 4、Pi 3/3B+/3A+、CM3/3+、Pi Zero 等。
*對於 Nvidia Jetson Nano 和 Xavier NX,您可以搜索B0249 / B0250以獲取Jetson相機包。
*對於PC /筆記本電腦,您可以直接購買HQ UVC相機模塊B0280(帶6mm CS卡口鏡頭)或B0288(帶變焦C卡口鏡頭)。
【影片VIDEO】:
Troubleshooting IMX477 Camera with Nano & NX (Hardware & Driver)/
使用 Nano 和 NX(硬件和驅動程序)對 IMX477 相機進行故障排除:
https://youtu.be/5R4Qcwj8uto
Sony IMX477 & CS Lens on Jetson Nano & NX: Quick Start Guide (B0249)/
Jetson Nano 和 NX 上的 Sony IMX477 和 CS 鏡頭:快速入門指南 (B0249):
https://youtu.be/WoUcoFWrzuU
【Specifications】
Camera / 攝像頭
- – Sensor: IMX477
- – 光學格式 /Optical Format: 1/2.3″ (diagonal 7.857mm)
- – 分辨率 /Resolution: 4056(H) x 3040(V) 12.3MP
- – 像素大小 /Pixel Size : 1.55um x 1.55um
- – 紅外靈敏度/ IR Sensitivity: Visible light/可見光
- – 接口 /Interface: 4-lane MIPI CSI-2
- – 默認鏡頭卡口 /Default Lens Mount: CS-Mount
- – 幀頻/Frame Rate:
Note: Due to Jetson Xavier NX/Nano hardware only supports 4K@30fps encoding, you cannot use it for 4k@60fps h.264/h.265 encoding.
注意:由於 Jetson Xavier NX/Nano 硬件僅支持4K@30fps編碼,您不能將其用於4k@60fps h.264/h.265 編碼。
Lens/鏡頭
- – 格式/ Format: 1/2.3 inch
- – 焦距 /Focal Length: 6mm
- – 光圈 /Aperture (F): Max. F1.2
- – 視場 /Field of View (FOV): 65° (H)
- – 安裝 /Mount: CS-Mount
- – 後焦距 /Back Focal Length: 7.53mm
- – MOD: 0.2m
- – 尺寸/Dimension: Φ30×31mm
- – 重量/Weight: 53g
Camera board/攝像頭底板
- – 尺寸/Board Size: 38mm×38mm
- – 孔距/Hole Pitch: Compatible with 29mm, 30mm, 34mm