產品說明3
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
ADXL326 5V ready triple-axis accelerometer(ada1018) 三軸加速度計
We've now got a wider range version of favorite triple-axis accelerometer - it even has an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. The ADXL326 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -16g is at 0v and 16g is at 3.3V with full scaling in between.
我們現在有了一個更寬範圍的最喜歡的三軸加速度計版本 - 它甚至有一個板載3.3V穩壓器 - 使其成為與Arduino等5V微控制器介面的完美選擇。該分線器帶有 3 個模擬輸出，用於在 0.75“x0.75” 分線板上進行 X、Y 和 Z 軸測量。ADXL326是ADI公司最新、最偉大的產品，以其卓越的MEMS器件質量而聞名。VCC 吸收高達 5V 的輸入電壓，並利用一個輸出引腳將其調節至 3.3V。模擬輸出是成比例的：這意味著0g測量輸出始終處於3.3V輸出（1.65V）的一半，-16g處於0V，16g處於3.3V，中間有完全縮放。
Fully assembled and tested. Comes with 8 pin 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2mm (0.08") mounting holes for easy attachment.
完全組裝和測試。隨附 8 針 0.1“ 標準針座，以防您想將其與試驗板或性能板一起使用。兩個 2mm （0.08“） 安裝孔，便於安裝。
The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth
See the ADXL326 webpage for datasheets and more
Dimensions (without header):
- Length:19mm/0.75in
- Width:19mm/0.75in
- Height:3.14mm/0.12in
- Weight:1.29g/0.05oz
