德源科技 
德源科技德源科技
公司簡介訂購方式匯款確認檔案下載 聯絡我們保固說明訂單查詢討論區
電子郵件:

密碼:

忘記密碼
加入會員
  首頁 | 原廠 Arduino® | 特殊服務設計 | 轉接座及轉接板/麵包板 | 開發板/燒錄器/模擬器 | 相容 For Arudino® 週邊及配件 | OKdo系列 | Saleae 系列 | Adafruit 系列 | ArduCam 系列 | Camera 攝像頭 | ROCK 系列 | Debix系列開發板 | Raspberry Pi 樹莓派 | Banana Pi 香蕉派 | BeagleBone 狗骨頭 | M5Stack系列 | Micro:bit (BBC)系列 | NVIDIA Jetson Nano系列 | Pololu 系列 | Pycom 系列 | Seeed 系列 | Sparkfun 系列 | WeMos 系列 | 傳感器 | Cubieboard/CubieTruck系列 | Firefly 系列 | Microduino系列 | Orange Pi 香橙派 | PCB板 | PLC 系列 | Robot 機器人 | UDOO 系列 | RedBearLab 系列 | LattePanda系列 | LittleBits 系列 | Libelium 系列 | Luxonis 相機系列 | PCduino | RobotElectronics 系列 | MageDok 顯示屏 | LCD/LCM/TFT/LVDC | Dimension Engineer 系列 | 通訊模組 | 影音器材(含轉換器) | 線材/連結器/轉換器 | 測量儀器 | 馬達/馬逹控制器/電源模組 | 其他 | 焊接/維修工具 | IC零件 | LED燈-裝飾燈 | 工作站迷你電腦 mini PC | 擴大器 | 雕刻機 | 電池 | 電腦周邊 | 檢定考套件 | 停售商品
  首頁 » 商品目錄 » ROCK 系列 » 04257054
商品搜尋 進階
 |  購物車內容  |  結帳   
商品分類
  主板
  電源
  配件
Arduino
Pololu
Seeed
Sparkfun
robot-electronics
dimensionengineering
libelium
adafruit
udoo
redbearlab
Arducam
goembed
Saleae
okdo
服務台
公司簡介
退換貨服務
訂購方式
聯絡我們
匯款確認
[<< 前一頁]  瀏覽相同分類產品 7 / 13  [下一頁 >>]
●RADXA Rock3 Compute module IO Board 擴展板, CM3 I/O板
NT$2,500
運費NT$50
條碼04257054
產品說明2

RADXA Rock3 Compute module  IO Board 擴展板, CM3 I/O板

 


Radxa CM3 IO Board is an application board for the ROCK3 Compute Module (CM3)

  Powered by the CM3 module - the Radxa CM3 IO board enables access to the complete feature set this Computing Module provides..( alternative also via Raspberry Pi CM4 with limited features)
由 CM3 模塊提供支持 - Radxa CM3 IO 板可以訪問此計算模塊提供的完整功能集。(也可以通過功能有限的 Raspberry Pi CM4 替代)

【Features/特徵】:

  • Designed for Radxa CM3, compatible to Raspberry Pi CM4
  • Half mini-ITX design (170*85mm), compatible to standard ATX case
  • Multiple display interfaces, HDMI, 2x MIPI DSI, eDP, dual display operation
  • 1 PCIe card slot, ATX case mount possible
  • Up to 2x SATA (one shared with USB3.0, one shared with PCIe 2.0)
  • Ubuntu/Debian and Android support
     



【IO底板另購】:

 從 USB 端口 (Radxa CM3 IO) 將映像安裝到 eMMC:
https://wiki.radxa.com/Rock3/installusb-install-radxa-cm3-io

What you need
【Necessary】
  • CM3(any variant) + CM3 IO board
  • If the CM3 doesn't have eMMC, a micro SD card larger than 8GB is required for OS
  • Power supply
    • The main PSU input (DC) is a 2.1mm DC tip positive +12V(only) input./12V DC電源
  • Monitor and HDMI Cable
    • CM3 IO board is equipped with a full sized HDMI connector. HDMI capable monitor is recommended.
    • HDMI EDID display data is used to determine the best display resolution. On monitors and TVs that support 1080p (or 4K) this resolution will be selected. If 1080p is not supported the next available resolution reported by EDID will be used. This selected mode will work with MOST but not all monitors/TVs.
  • USB to TTL serial cable
    • CM3 IO board exports a dedicated serial console for CPU, which can access the low level debug message.
  • Micro USB cable
    • If you want write image to CM3 eMMC from USB OTG port or use fastboot/adb commands you need a micro USB cable to connect CM3 IO board and PC.
 

【Power on】

 

  Plug in the 12V DC, the CM3 should automatically boot. If the CM3 doesn't have eMMC or the eMMC is empty, plug in the micro USB to host PC, host PC should detect the CM3 in maskrom mode.
【Install image to CM3】
  • Install image to SD card, refer microSD card installation
  • Install image to eMMC, refer Install to eMMC from USB port (Radxa CM3 IO)
【USB 3.0】
  There is one USB 3.0 A port on the IO board, supporting 5.0Gbps. The USB 3.0 function is shared with SATA2, a 1in->2out mux CH482D is used for function switching to USB 3.0 or SATA2. GPIO3_C7 is used for the route select, When GPIO3_C7 is low, signal route to USB3.0, when GPIO3_C7 is high, signal route to SATA2.
  Current output limit for the USB 3.0 is 2A.
【PCIe Slot】
  There is one PCIe x1 slot on the IO board, supporting 5.0Gbps. The PCIe function is shared with SATA1, a 1in->2out mux CH482D is used for function switching to PCIe or SATA1. GPIO3_C6 is used for the route select, When GPIO3_C6 is low, signal route to PCIe, when GPIO3_C7 is high, signal route to SATA1.
  The PCIe on the CM3 meets PCIe 2.1 specification and support one lane and Root Complex mode only. PCIe slot power is directly from +12V DC, make sure the power supply can provide enough current for the PCIe card.
【SATA1&2】
  IO board has two SATA ports compatible with Serial ATA 3.3 and AHCI Revision 1.3.1, SATA 1 is shared with USB 3.0 and SATA 2 is shared with PCIe, set the corresponding signal route to use it. Connector U28 can be used for SATA power, the +12V of U28 is directly from the +12V DC, make sure the power supply can provide enough current for the HDD.
【Micro USB】
  The Micro USB port on the IO board supports host and device mode, it's used for firmware installing to eMMC from host PC or using ADB debugging. Note: When in maskrom mode, the USB OTG is forced in device mode.

 

產品規格


 



【支持的CM】

  • RADXA CM3 all variants
  • 功能有限的樹莓派 CM4

【連接性/connector】

  • 5 個 USB 2.0 端口(兩個內部 USB2 接頭,三個 A 型連接器)
  • 1 個 USB 3.0 端口(5Gbps,A 型連接器) 1 個
  • USB 2.0 OTG(微型 USB 連接器)
  • 1 個 PCIe 1 通道主機,第 2 代(5Gbps, x1 PCIe 連接器 )
  • 2 x SATA 7P 連接器,一個與 USB 3 共享,一個與 PCIe 共享
  • 1x microSD 卡連接器
  • 40 x GPIO 排針

【聯網】:

  • 1 個千兆以太網 RJ45,支持 PoE

【視頻/Video】:

  • 1x HDMI 高達 4K x 2K@60HZ
  • 1x eDP 支持 4K x 2K@60HZ
  • 2x MIPI DSI 4 lanes up to 1920 x 1080@60HZ, 支持雙顯示器
  • 雙 MIPI CSI 輸入

【聲音的/Audio】:3.5 毫米耳機插孔,帶麥克風支持

【其他】:

  • 鋰電池 連接器connector
  • RTC電池 連接器connector
  • 風扇 連接器connector

【Power/電源】:

  • DC 12V 2.5/5.5mm
  • 或帶軟盤電源連接器的 4P ATX PSU

【尺寸/Dimension】:160 毫米 × 90 毫米

【產品壽命】:Radxa CM3 IO 板將至少在 2029 年 9 月之前保持生產




 

相關資訊

 



[核心板另購]:

 

RADXA Rock3 Compute module (2G+16G 帶WiFi) 核心板RK3566,可替代 RPi CM4
( 2GB/16eMMC/WIFI RM116 - D2E16W2)

 


 

 

問與答

目前沒有任何商品問答!
本商品上架日期:2013-06-29.
評價
購物車 更多
1 x ●(特價)Sparkfun原廠 PodSocket Breakout(DEV-10327)最後一個
1 x (6818核心板1G+16G/豪華型/7吋RGB電容屏)三星八核S5P6818開發板四核S5P4418評估板
1 x $DFR原廠 麥昆: micro:bit教育機器人V4.0 (餐5=標配+V2.2主板+遙控器)圖形化編程(ROB148-5)
1 x 邦特玻璃吸盤 強力吸提器 單雙三爪加厚貼 瓷磚地板磚鋁合金 搬運工具 (標準型黑色雙爪吸盤)
1 x ●DL24 180W 數顯電子負載電壓電流表電池容量功率老化放電器usb檢測試儀
1 x $ reTerminal CM4104032/帶有樹莓派Pi CM4、5寸電容觸控屏、嵌入式Linux110070048
1 x ATMEGA32-8PI
1 x $BBC Doctor Who HiFive Inventor Kit (基本套件) (DEV-17596)
1 x (缺貨) 超強ov7670模塊 (帶AL422 FIFO,帶2.8V LD0,帶24MHZ有源晶振)
1 x 200萬 高清紅外夜視 1080P USB免驅 帶麥克風 監控攝影 USB攝像頭 OV2710人臉識別 HBV-1716 (白燈
1 x 2.8inch DSI LCD / 2.8寸IPS全貼合電容觸控屏小屏幕480×640像素DSI通信
1 x Pocket PiGRRL Pack Build your own Pi Game Emulator-CASE+PI NOT I
1 x Adafruit CRICKIT FeatherWing for any Feather (ada3343)
1 x W78E516B
NT$1,038,248
查詢訂單狀態
 
請輸入您的訂單編號
商品通知狀態 更多
通知●RADXA Rock3 Compute module IO Board 擴展板, CM3 I/O板
更新時通知我
推薦給朋友
 
推薦這個商品給朋友

聯絡方式:手機:0933807110 或 0968222607
E-mail:[email protected](主要信箱) & [email protected](次要) & [email protected] & [email protected] & [email protected]