產品說明1
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
SparkFun Qwiic pHAT Extension 擴展板 for Raspberry Pi 400 (DEV-17512)
SparkFun原廠 Qwiic pHAT Extension (DEV-17512)，樹莓派 Pi 400 擴展板
參考影片: https://youtu.be/EjGmLbmaQeM
DESCRIPTION
The SparkFun Qwiic pHAT Extension for the Raspberry Pi 400 provides you with a quick and easy solution to access all of the 400's GPIO, stack your favorite HAT right-side up, or connect a Qwiic-enabled device to the I2C bus (GND, 3.3V, SDA, and SCL). Since the Qwiic system allows for daisy-chaining boards with different addresses, you can also stack as many sensors as you’d like to the mounting holes on the pHAT to create a tower of sensing power!
Raspberry Pi 400的SparkFun Qwiic pHAT擴展為您提供了快速簡便的解決方案，可訪問所有400的GPIO，將您喜歡的HAT正面朝上堆疊或將支持Qwiic的設備連接到I 2 C總線（GND） ，3.3V，SDA和SCL）。由於Qwiic系統允許使用具有不同地址的菊花鍊板，因此您還可以在pHAT上的安裝孔中堆疊任意數量的傳感器，以建立感應功率塔！
The Qwiic pHAT Extension connects to the Raspberry Pi 400's GPIO using a 2x20 right angle header and extends out to the edge of the PCB. Two Qwiic connectors are included on each side of the board for easy access to the I2C bus. A set of large silicone bumpers have also been included for better stability when connecting the Qwiic pHAT Extension to the Raspberry Pi 400's GPIO port.
Qwiic pHAT Extension使用2x20直角接頭連接到Raspberry Pi 400的GPIO，並延伸到PCB的邊緣。評估板的每一側都包含兩個Qwiic連接器，以便於訪問I 2 C總線。當將Qwiic pHAT Extension連接到Raspberry Pi 400的GPIO端口時，還提供了一組大型矽膠緩衝器，以提高穩定性。
Note: The Raspberry Pi 400 is NOT included. Check the Hookup Accessories section below for Raspberry Pi 400 options.
注意：不包括Raspberry Pi 400 。有關Raspberry Pi 400選件，請查看下面的“連接配件”部分
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
所述SparkFun Qwiic連接系統是我的生態系統2 Ç傳感器，執行器，防護罩和電纜，使原型更快，更容易出錯。所有支持Qwiic的板均使用通用的1mm間距4引腳JST連接器。這樣可以減少所需的PCB空間，並且極性連接意味著您不會將其鉤錯。
【FEATURES】
- 2x Qwiic Connection Ports
2個Qwiic連接端口
- 10x Mounting Holes
10個安裝孔 - Reroutes and extends a Raspberry Pi 400's 40-pin headers to a vertical position
重新路由Raspberry Pi 400的40針接頭並將其擴展到垂直位置
