產品說明0
Arduino YÚN is the first member of a new groundbreaking line of wifi products combining the power Linux with ease of use of Arduino.
The first Arduino YÚN is the combination of a classic Arduino Leonardo (based on the Atmega32U4 processor) with a Wifi system-ona-chip running Linino (a MIPS GNU/Linux based on OpenWRT). We embedded the Linux machine directly on the PCB of the Arduino Leonardo and we connected the two so that from Arduino it’s very easy to run commands on the Linux side and use it as an Ethernet and Wifi interface. Temporary Datasheet
Technical Specifications
| Microcontroller | ATmega32u4 |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 5V via microUSB or PoE 802.3af |
| Input Voltage (limits) | 6-20V |
| Digital I/O Pins | 14 |
| PWM Channels | 7 |
| Analog Input Channels | 6 (plus 6 multiplexed on 6 digital pins) |
| DC Current per I/O Pin | 40 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 32 KB (ATmega32u4) of which 4 KB used by bootloader |
| SRAM | 2.5 KB (ATmega32u4) |
| EEPROM | 1 KB (ATmega32u4) |
| Clock Speed | 16 MHz |
MIPS 24K processor operating at up to 400 MHz
DDR2 64MB Ram and 16MB SPI Flash
Complete IEEE 802.11bgn 1x1 AP or router
USB 2.0 host/device
poE compatible 802.3af
MicroSD card support
**新版多送一片壓克力板如下圖↓↓↓
==================================================
加購品
