產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Arducam Mini 16MP IMX519 NOIR Camera Module for Raspberry Pi Zero
型號：B0391，Arducam Mini 16MP IMX519 NOIR Camera，適用於 Raspberry Pi Zero
Overview
In order to meet the increasing need for Raspberry Pi Zero compatible camera modules, the Arducam team now released another add-on mini camera module that is fully compatible with Raspberry Pi Zero.
為了滿足對Raspberry Pi Zero兼容相機模組日益增長的需求，Arducam團隊現在發佈了另一個與Raspberry Pi Zero完全相容的附加迷你相機模組。
The board itself is tiny, at around 60mm x 11.5mm. The neck width of the camera module is 6mm, this highlight making it perfect for endoscope, spy surveillance, or other applications where size and image quality are important. It connects to Raspberry Pi Zero by way of a short ribbon cable. The camera is connected to the BCM2835 processor on the Pi Zero via the CSI bus, a higher bandwidth link that carries pixel data from the camera back to the processor.
電路板本身很小，大約60mm x 11.5mm。相機模組的頸部寬度為6mm，這一亮點使其非常適合內窺鏡，間諜監控或其他尺寸和圖像品質很重要的應用。它通過短帶狀電纜連接到Raspberry Pi Zero。相機通過 CSI 總線連接到 Pi Zero 上的 BCM2835 處理器，CSI 總線是一條頻寬更高的鏈路，可將圖元數據從相機傳回處理器。
Application:
- Cellular phones 手機
- PDAs
- Toys 玩具
- Other battery-powered products 其他電池供電產品
- Can be used in Raspberry Pi Zero
SPEC
| Sensor | Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534) |
| Output | RAW10/8, COMP8 |
| Lens: | f/1.75; EFL: 4.28; FoV: 80° |
| IR Filter | Without IR filter, sensitive to IR light |
| Video Modes | 1080p@30fps, 720p@60fps |
| Linux integration | V4L2 driver available |
| Ribbon Cable Length | 60mm |
Documentation
Manual
