型號:B0250,Arducam 12.3MP IMX477攝像機模塊(帶殼)+6mmCS鏡頭+腳架+HDMI線、擴展板 For Jetson Nano, Xavier NX
Arducam Complete High Quality Camera Bundle for Raspberry Pi, 12.3MP 1/2.3 Inch IMX477 Camera Module with 6mm CS-Mount Lens, Metal Enclosure, Tripod and HDMI Extension Adapter
適用於Raspberry Pi的Arducam完整優質攝像機套件,12.3MP 1 / 2.3英寸IMX477攝像機模塊,帶6mm CS鏡頭,金屬外殼,三腳架和HDMI擴展適配器、HDMI線
〈Package Includes 清單〉:
-
1 pcs complete 12.3MP IMX477 color camera module 彩色攝像頭模塊
- 1 pcs 6mm focal length CS-mount camera lens 焦距 CS-mount 相機鏡頭
- 1 pcs HDMI-CSI camera adapter board with 60mm/2.36inch 15 pin camera cable
HDMI-CSI 攝像頭適配器板,帶 60 毫米/2.36 英寸 15 針攝像頭電纜 - 1 pcs 1m high-speed HDMI cable 高速 HDMI 線
-
1 pcs metal enclosure for camera module 攝像頭模塊的金屬外殼
-
1 pcs mini tripod stand 迷你三腳架
示意圖:
Arducam just released this complete High Quality camera bundle for Jetson Nano/Xavier NX/Raspberry Pi Compute Module CM4, CM3, CM3+, an IMX477 camera board with a 6mm CS lens, a customized metal enclosure, a tripod stand and a set extension adapter. The customers can use this camera module on Jetson Nano/Xavier NX/Raspberry Pi Compute Module CM4, CM3, CM3+ natively with hardware ISP features.
Arducam 剛剛發布了完整的高品質相機套裝,適用於 Jetson Nano/Xavier NX/Raspberry Pi 計算模塊 CM4、CM3、CM3+、帶有 6mm CS 鏡頭的 IMX477 相機板、定制金屬外殼、三腳架和一套擴展適配器。客戶可以在具有硬件 ISP 功能的 Jetson Nano/Xavier NX/Raspberry Pi 計算模塊 CM4、CM3、CM3+ 上使用此相機模塊。
NOTE: This camera is mainly designed for the Jetson Nano. It can also be used on the Raspberry Pi Compute Module (like CM3, CM3+), but is not compatible with standard Raspberry Pi models (like Raspberry Pi 3/3B+/4).
注意:此相機主要是為 Jetson Nano 設計的。它也可以在 Raspberry Pi 計算模塊(如 CM3、CM3+)上使用,但與標準 Raspberry Pi 型號(如 Raspberry Pi 3/3B+/4)不兼容。
★ KERNEL CAMERA DRIVER USED 使用內核攝像頭驅動
This camera relies on kernel drivers to work – one kernel version, one camera driver.
該相機依賴內核驅動程序工作——一個內核版本,一個相機驅動程序。
- Versions earlier than JetPack 4.3 (L4T 32.3.1) are not supported.
不支持早於 JetPack 4.3 (L4T 32.3.1) 的版本。
- Up or downgrading your OS leads to a kernel bump, and you’ll need to re-install a matching driver.
升級或降級您的操作系統會導致內核崩潰,您需要重新安裝匹配的驅動程序。
- Future JetPack/kernel updates require future drivers. When that happens, please allow us some time to process. And if you don’t see it released in time, kindly remind us.
未來的 JetPack/內核更新需要未來的驅動程序。發生這種情況時,請給我們一些時間來處理。如果您沒有及時看到它發布,請提醒我們。
<Specifications 規格>
- Camera 攝像頭
- - Sensor: IMX477
- - Optical Format: 1/2.3" (diagonal 7.857mm)
- - Resolution: 4056(H) x 3040(V) 12.3MP
- - Pixel Size: 1.55um x 1.55um
- - IR Sensitivity: Visible light
- - Interface: 4-lane MIPI CSI-2
- - Default Lens Mount: CS-Mount
- - Frame Rate:
Note: Due to Jetson Xavier NX/Nano hardware only supports 4K@30fps encoding, you cannot use it for 4k@60fps h.264/h.265 encoding.
- –傳感器:IMX477
- –光學格式:1 / 2.3“(對角線7.857mm)
- –分辨率:4056(H)x 3040(V)12.3MP
- –像素大小:1.55um x 1.55um
- –紅外靈敏度:可見光
- –接口:4通道MIPI CSI-2
- –默認鏡頭卡口:CS卡口
- –幀頻:
注意:由於 Jetson Xavier NX/Nano 硬件僅支持4K@30fps編碼,您不能將其用於4k@60fps h.264/h.265 編碼。
- Format: 1/2.3 inch
- Focal Length: 6mm
- Aperture (F): Max.F1.2
- Field of View (FOV): 65° (H)
- Mount: CS-Mount
- Back Focal Length: 7.53mm
- MOD: 0.2m
- Dimension: Φ30×31mm
- Weight: 53g
–格式:1 / 2.3英寸
–焦距:6mm
–光圈(F):最大。F1.2
–視場(FOV):65°(H)
–安裝:CS安裝
–後焦距:7.53mm
– MOD:0.2m
–尺寸:Φ30×31mm
–重量:53g