※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

型號：U6268，Arducam Case 相機外殼套件(含三腳架、排線)，適用樹莓派Pi Camera V1、V2、16MP、64MP 保護套（IMX219、IMX519、...）

型號：U6268，Arducam Case 相機外殼套件(含三腳架、排線)，適用樹莓派Pi Camera V1、V2、16MP、

Arducam Raspberry Pi Case Bundle for IMX519 16MP Autofocus Camera Module, with Lightweight Mini Tripod Stand and 1ft /30 cm FPC Camera Cable （U6268）

　　The kit is specially designed for the Arducma 16MP autofocus module, and the package includes an ABS case, a mini tripod, and a 30cm FPC camera cable. It allows you to easily fix the Raspberry Pi camera boards and place them wherever you want to. It is also compatible with the Raspberry Pi official cameras V1 and V2, as well as other camera boards with a size of 25*24mm.
　　該套件專為 Arducma 16MP 自動對焦模塊設計，包裝內包含一個 ABS 外殼、一個迷你三腳架和一條 30cm FPC 相機電纜。它允許您輕鬆修復 Raspberry Pi 攝像頭板並將它們放置在您想要的任何位置。它還兼容樹莓派官方相機V1和V2，以及其他尺寸為25*24mm的相機板。

Feature

• You will Get: A mini metal tripod, an ABS camera case, a pcs 30cm FPC camera cable
  一個迷你金屬三腳架、一個 ABS 相機包、一條 30 厘米 FPC 相機電纜
• Raspberry Pi Camera Case: Perfect ABS case for raspberry pi camera, this protective case is designed for Raspberry Pi camera modules, compatible with official raspberry pi camera V1, V2, and other 25*24mm size camera boards.
  Raspberry Pi 相機保護套：適用於 Raspberry Pi 相機的完美 ABS 保護套，這款保護套專為 Raspberry Pi 相機模塊設計，兼容官方 raspberry pi 相機 V1、V2 和其他 25 * 24 毫米尺寸的相機板。
• Mini adjustable metal Tripod: Equipped with adjustable height metal tripod and rubber feet, compatible with various cases with 1/4" mounting holes or webcam devices; it also has a mini ball head that can rotate 360 degrees and tilt 90 degrees, the height can be extended from 4.9 inches to 7 inches.
  迷你可調節金屬三腳架：配備可調節高度金屬三腳架和橡膠腳墊，兼容各種帶1/4"安裝孔或網絡攝像頭設備的機箱；它還有一個可360度旋轉和90度傾斜的迷你球頭，高度可以從 4.9 英寸延長到 7 英寸。
• FPC Camera cable: 30cm 15-15pin 1.0mm pitch FPC camera cable, supports connecting various Raspberry Pi cameras with MIPI interface and Raspberry Pi standard model 3/3B+/4B.
  FPC相機線：30cm 15-15pin 1.0mm間距FPC相機線，支持連接各種帶MIPI接口的樹莓派相機和樹莓派標準型號3/3B+/4B。
• Small and Light-weight: the whole kit is very small and light, also easy to set up, conducive to carry, and suitable for any project that needs to frequently change the location, such as outdoor shooting, desktop webcam, etc.
  　小巧輕便：整個套件非常小巧輕便，也易於設置，便於攜帶，適用於任何需要頻繁更換位置的項目，例如戶外拍攝、桌面網絡攝像頭等。

Feature［外殼說明］

• Perfect for Raspberry Pi Camera: A protective case designed for Raspberry Pi camera modules, compatible with official raspberry pi camera V1, V2 and other 25*24mm size camera boards.
• Quality Build: The transparent case and base are made of rigid ABS plastic, which not only looks great, but also provides sturdy protection for your Raspberry Pi camera.
• Hassle-free: Simply secure the camera board with the four screws included in the package, then snap the top cover to the base and you're ready to go.／
  　　輕鬆無憂：只需使用包裝中的四顆螺絲固定攝像頭板，然後將頂蓋卡入底座，即可開始使用。
• Pocket Size and Lightweight: Overall size 1.57*1.37*0.58inch; Only about 9g easy to carry and store.
• Easy to use: The housing also has a mounting hole compatible with any tripod with standard 1/4"-20 mounting screws. This allows the camera to be secured anywhere you want, and the back also has an opening for the camera cable so you can remove it without opening the case.／
  　　易於使用：外殼還有一個安裝孔，可與任何帶有標準 1/4"-20 安裝螺釘的三腳架兼容。這樣可以將相機固定在您想要的任何位置，背面還有一個用於相機電纜的開口，因此您可以在不打開外殼的情況下將其取出。