※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
MyoWare 2.0 Muscle Sensor Development Kit
KIT-18441 升級KIT-21269
修訂變更： V2.0.4 的以下變更包括：
- PCB板厚度增加。／PCB board thickness increased.
- 用於按扣連接器按鈕的 NPTH。／NPTH for snap connector buttons.
- 更新了帶槽的按扣連接器按鈕的佔用面積，以改善清潔效果。／Updated footprint for snap connectors buttons with slots for improved cleaning.
- 更新了參考引腳跳線墊的大小。／Updated size of reference pin's jumper pad.
Includes:
- 1x MyoWare 2.0 Muscle Sensor 主板（10498） (Version 2.0.4)
- 1x MyoWare 2.0 Power Shield（12235）
- 1x MyoWare 2.0 LED Shield（3843）
- 1x MyoWare 2.0 Link Shield（7213）
- 1x TRS 3.5mm Cable 線（3847）
- 1x MyoWare 2.0 Arduino Shield（9855）
- 1x Reversible USB A to C Cable - 2m 線
- 1x Disposable Surface EMG/ECG/EKG Electrode - 24mm (10 pack) 貼片（18361）
- 1x MyoWare 2.0 Cable Shield （12209）
- 1x Sensor Cable - Electrode Pads (3 connector) 電極線（8081）
- 1x MyoWare 2.0 Reference Cable 線（3820）
- 1x SparkFun Mini Screwdriver 螺絲起子
- 1x SparkFun RedBoard Plus 控制板 （21903）
Note: This is a more advanced development kit to get started with the muscle sensor and includes the minimum parts to get started using one muscle sensor. Up to five additional muscle sensors can be added to this kit using five corresponding link shields & TRS 3.5mm cables listed above.
注意：這是一個更高級的開始使用肌肉傳感器的開發套件，包括開始使用一個肌肉傳感器的最少部件。 使用上面列出的五個相應的鏈路屏蔽和 TRS 3.5 毫米電纜，最多可以將五個額外的肌肉傳感器添加到該套件中。
【圖片對應】：
The MyoWare® 2.0 Muscle Sensor Development Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides you with all the boards from the MyoWare 2.0 ecosystem to test out different configurations for your application. Depending on your configuration, you can visualize the muscles in action with the MyoWare 2.0 LED Shield or read the analog output using an Arduino-compatible microcontroller! Simply snap on a MyoWare 2.0 Shield, add some EMG sensor pads, attach the sensor to a muscle group, and flex!
MyoWare® 2.0 肌肉傳感器開發套件是與 Arduino 兼容的一體式肌電圖 (EMG) 傳感器套件，它為您提供來自 MyoWare 2.0 生態系統的所有板，以測試您的應用程序的不同配置。 根據您的配置，您可以使用 MyoWare 2.0 LED Shield 可視化運動中的肌肉，或使用與 Arduino 兼容的微控制器讀取模擬輸出！ 只需扣上 MyoWare 2.0 Shield，添加一些 EMG 傳感器墊，將傳感器連接到肌肉群，然後彎曲！
The kit also includes a mini screwdriver to easily remove shields, USB A to C cable to recharge the 40mAh LiPo batteries or connecting your microcontroller to a computer, MyoWare 2.0 Reference Cable to connect to large muscle groups, sensor cable to connect to muscle groups away from the sensor, 3.5mm TRS-to-TRS cable to easily connect the MyoWare 2.0 ecosystem to an Arduino-compatible development board using an Uno R3 footprint, and RedBoard Plus.
該套件還包括一個用於輕鬆移除防護罩的迷你螺絲刀、用於為 40mAh LiPo 電池充電或將微控制器連接到計算機的 USB A 到 C 電纜、用於連接大肌肉群的 MyoWare 2.0 參考電纜、用於連接肌肉群的傳感器電纜 從傳感器、3.5 毫米 TRS 到 TRS 電纜，使用 Uno R3 封裝和 RedBoard Plus 輕鬆將 MyoWare 2.0 生態系統連接到與 Arduino 兼容的開發板。
The MyoWare 2.0 Muscle Sensor included in this kit has been redesigned from the ground up with a new easy-to-use, compact design and upgraded with the latest and greatest chipset improving sensor performance and reliability. The sensor measures muscle activity through the electric potential of the muscle, commonly referred to as surface electromyography (EMG or sEMG for short). When your brain tells your muscle to flex, it sends an electrical signal to your muscle to start recruiting motor units (the bundles of muscle fibers that generate the force behind your muscles).
該套件中包含的 MyoWare 2.0 肌肉傳感器經過重新設計，採用全新的易於使用、緊湊的設計，並使用最新最好的芯片組進行了升級，提高了傳感器的性能和可靠性。 傳感器通過肌肉的電位測量肌肉活動，通常稱為表面肌電圖（EMG或簡稱sEMG）。 當你的大腦告訴你的肌肉彎曲時，它會向你的肌肉發送一個電信號，以開始募集運動單位（在你的肌肉後面產生力量的肌肉纖維束）。
The harder you flex, the more motor units are recruited to generate greater muscle force. The greater the number of motor units, the more the electrical activity of your muscle increases. MyoWare 2.0 Muscle Sensor will analyze the filtered and rectified electrical activity of a muscle and output a signal (0-VIN volts, where VIN signifies the voltage of the power source) that represents how hard the muscle is being flexed. The innovative connector system eliminates the need to solder connections for the MyoWare 2.0 ecosystem whether you are visualizing the muscles in action with the MyoWare 2.0 LED Shield or reading the analog output with an Arduino-compatible development board.
你彎曲得越用力，就會招募更多的運動單位來產生更大的肌肉力量。 運動單位的數量越多，肌肉的電活動就越多。 MyoWare 2.0 肌肉傳感器將分析肌肉的濾波和整流後的電活動，並輸出一個信號（0-VIN 伏，其中 VIN 表示電源的電壓），表示肌肉的彎曲程度。 創新的連接器系統無需為 MyoWare 2.0 生態系統焊接連接，無論您是使用 MyoWare 2.0 LED Shield 來可視化運動中的肌肉，還是使用兼容 Arduino 的開發板讀取模擬輸出。
This kit is constructed to follow the standalone examples using the MyoWare 2.0 Power Shield and LED Shield; and read the output voltage from a single muscle sensor using an Arduino-compatible microcontroller featured in the MyoWare 2.0 Muscle Sensor Guide. For a basic setup without a microcontroller, check out the MyoWare 2.0 Muscle Sensor Basic Kit. The basic kit includes the bare minimum from the MyoWare 2.0 ecosystem to visualize your muscles in action without programming.
該套件的構造遵循使用 MyoWare 2.0 Power Shield 和 LED Shield 的獨立示例； 並使用 MyoWare 2.0 肌肉傳感器指南中的 Arduino 兼容微控制器讀取單個肌肉傳感器的輸出電壓。 對於沒有微控制器的基本設置，請查看 MyoWare 2.0 肌肉傳感器基本套件。 基本套件包括來自 MyoWare 2.0 生態系統的最低要求，無需編程即可可視化您的肌肉活動。
Note: This item may take longer to process due to the battery installed in the equipment and therefore does not qualify for same-day shipping policy. Additionally, these batteries can not be shipped via Ground or Economy methods to Alaska or Hawaii. Sorry for any inconvenience this may cause.
注意：由於設備中安裝了電池，此項目可能需要更長的時間來處理，因此不符合當日發貨政策。 此外，這些電池不能通過陸運或經濟方式運送到阿拉斯加或夏威夷。 如有不便，敬請原諒。
Boards in the MyoWare 2.0 ecosystem are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals.
MyoWare 2.0 生態系統中的板不適用於診斷人類或其他動物的疾病或其他狀況，或用於治愈、緩解治療或預防疾病。
The MyoWare 2.0 ecosystem consists of shields that easily interface with the MyoWare® 2.0 Muscle Sensor, which is a low-cost, Arduino-compatible, all-in-one electromyography (EMG) sensor from Advancer Technologies. The innovative connector system allows users to easily snap shields together with a compact low profile and connect to a microcontroller's analog input to measure raw, filtered, and rectified electrical activity of a target muscle. This eliminates the need to solder connections between boards.
MyoWare 2.0 生態系統由可輕鬆與 MyoWare® 2.0 肌肉傳感器接口的防護板組成，這是一款來自 Advancer Technologies 的低成本、與 Arduino 兼容的一體化肌電圖 (EMG) 傳感器。 創新的連接器系統使用戶可以輕鬆地將防護罩與緊湊的薄型連接在一起，並連接到微控制器的模擬輸入，以測量目標肌肉的原始、濾波和整流電活動。 這消除了在板之間焊接連接的需要
This product is a collaboration with Brian Kaminski from Advancer Technologies. A portion of each sales goes back to them for product support and continued development.
該產品是與 Advancer Technologies 的 Brian Kaminski 合作推出的。 每次銷售的一部分都會返回給他們，以獲得產品支持和持續開發。
