產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
SparkFun MicroMod Main Board - Double 雙 (DEV-18576)
影片參考:https://youtu.be/GeeHryO9D8k
DESCRIPTION
The MicroMod Main Board is a specialized carrier board that allows you to interface a MicroMod Processor Board with up to two MicroMod Function Boards. With the M.2 MicroMod connector, connecting your Processor and Function Boards is a breeze. Simply match up the key on your board's beveled edge connector to the key on the M.2 connector and secure the boards with screws.
MicroMod 主機板是一種專用的載板，允許您將 MicroMod 處理器板與最多兩個 MicroMod 功能板連接。使用 M.2 MicroMod 連接器，連接處理器和功能板變得輕而易舉。只需將主機板斜邊連接器上的鑰匙與 M.2 連接器上的鑰匙相匹配，然後用螺釘固定主機板即可。
The Double Main Board includes one USB-C connector for power and programming the Processor Board. Two buttons for reset and boot are also populated on the board. Also included on the board is a 2A resettable fuse and 3.3V/1A voltage regulator. We've even added a convenient jumper for advanced users looking to bypass the fuse and another to measure the current consumption for low power testing. For those that need to go remote with their application, the board includes a 2-pin JST connector and a single cell LiPo MCP73831 charge IC (set to a rate of 500mA). Three status LEDs are available for power and charging. There is a microSD card socket so you can also plug in a microSD card for data logging. Finally, two Qwiic connectors are populated on the board to easily add Qwiic enabled I2C devices to your projects!
雙主機板包括一個 USB-C 連接器，用於為處理器板供電和程式設計。板上還填充了兩個用於複位和啟動的按鈕。該板上還包括一個 2A 可自恢復保險絲和 3.3V/1A 穩壓器。我們甚至為希望繞過保險絲的高級使用者添加了一個方便的跳線，併為低功耗測試提供了另一個用於測量電流消耗的跳線。對於那些需要遠端應用的使用者，該板包括一個 2 引腳 JST 連接器和一個單節 LiPo MCP73831 充電 IC（設置為 500mA 的速率）。三個狀態LED可用於供電和充電。有一個microSD卡插槽，因此您也可以插入microSD卡進行數據記錄。最後，在電路板上填充兩個 Qwiic 連接器，以便輕鬆添加啟用 Qwiic 的 I2C設備到您的專案！
Note: A MicroMod Processor and Function Board are not included with the MicroMod Main Board. These boards will need to be purchased separately.
注意：MicroMod 處理器和功能板不包括在 MicroMod 主機板中。這些電路板需要單獨購買。
MicroMod is a modular interface ecosystem that connects a microcontroller “processor board” to various “carrier board” peripherals. Utilizing the M.2 standard, the MicroMod standard is designed to easily swap out processors and function boards on the fly. Pair a specialized carrier board for the project you need with your choice of compatible processor!
MicroMod是一個模組化介面生態系統，將微控制器「處理器板」連接到各種「載板」外設。MicroMod 標準採用 M.2 標準，旨在輕鬆更換處理器和功能板。將您所需的專案專用載板與您選擇的相容處理器配對！
INCLUDES
- 1x MicroMod Main Board - Double / 主機板
- 4x Phillips #0 M2.5x3mm Screws / 十字螺絲
- 2x 2-pin Jumper Shunts / 跳帽
FEATURES
- Input Voltage Range / 輸入電壓範圍
- 5V via USB C Connector / 連接器
- ~3.7V to 4.2V via LiPo Battery Connector / 過鋰聚合物電池連接器
- Built-in Resettable PTC Fuse / 內置自恢復 PTC 保險絲 (Rated 額定值 5V/2A)
- AP7361C 3.3V Voltage Regulator / 穩壓器 (Rated 額定電流 1A)
- Integrated MCP73831 Single Cell LiPo Charge Circuit / 單節鋰聚合物充電電路
- Adjustable Charge Rates via DIP Switch / 通過 DIP 開關調節充電速率
- Ports
- 1x USB Type C Connector / 連接器
- 1x 2-Pin JST Connector / 連接器
- M.2 Connectors
- 1x MicroMod Processor Board / 處理器板
- 1x MicroMod Function Board / 功能板
- 2x Qwiic Enabled I2C
- 1x MicroSD Card Socket / 插槽
- 1x SWD 2x5 Header / 接頭
- Buttons
- 1x Reset / 複位
- 1x Boot / 啟動
- LEDs
- Jumpers
- MEAS
- PTC
- 3.3V EN (for Main Board)
- VIN LED
- 3.3V LED
- Alt PWR EN0 (for Function Board 0)
- Alt PWR EN0 (for Function Board 1)
DOCUMENTS
Hardware Documentation:
MicroMod Documentation:
