產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
XBee-PRO ZB (S2C) module with RPSMA Antenna
(新XB020) 63mW
Digi XBee-PRO ZB S2C TH（RPSMA Antenna 天線）
＊S2B 升級 S2C＊再升級S3版本＊
【XBee PRO版本】
S2B版本：XBP24BZ7SIT-004（63mW）停產
S2C版本：XBP24CZ7SIT-004（63mW）
S3版本：XB3-24Z8ST（63mW）
原廠 XBee 3 Pro Module - RP-SMA Antenna (WRL-15131)(XB3-24Z8ST)
http://twarm.com/commerce/product_info.php?products_id=1547
Features:
- 工作電壓：3.3V－升級為：2.7V~3.6V
- 低功耗工作電流：40mA
－更新為：
【傳輸電流】
＊標準：120 mA @ 3.3 VDC / 45 mA升壓模式
＊可編程：120 mA @ 3.3 VDC / 59 mA升壓模式
【接收電流】
＊標準：31 mA @ 3.3 VDC
＊可編程：45 mA @ 3.3 VDC
【掉電電流】
＊標準：<1μA@25ºC
＊可編程：1.5μA@25ºC 最大250kbps 無線通訊速率－升級為：RF 250 Kbps，串行最高1 Mbps- 63mW output (+18dBm)
- 2 mile (3200m) range
- RPSMA connector
- Fully FCC certified
6路10-bit ADC 輸入接口－更新為：４位8 個數據 IO 接口－升級為：15個- 128-bit encryption
- Local or over-air configuration
- AT or API command set
- External Antenna Required
- 接收靈敏度（1％PER）：-100 dBm / -102 dBm增強模式
相關文件
【S2C版本說明】
【S2B版本說明】
XBP24BZ7SIT-004
(以下是舊本資訊)
Description: This is the XBee XBP24BZ7SIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Series 2B modules use a different hardware configuration from the earlier models and while they will communicate with Series 2 XBee modules, they are not compatible with the outdated Series 2.5 Modules.
Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide!
Features:
- 3.3V @ 295mA
- 250kbps Max data rate
- 63mW output (+17dBm)
- 1 mile (1600m) range
- RPSMA connector
- Fully FCC certified
- 6 10-bit ADC input pins
- 8 digital IO pins
- 128-bit encryption
- Local or over-air configuration
- AT or API command set
- External Antenna Required
Documents:
