產品說明0
B0183，Arducam IMX219 低失真Camera 攝像頭模組，適用NVIDIA Jetson Nano
Arducam IMX219 Low Distortion M12 Mount Camera Module for NVIDIA Jetson Nano/Xavier NX
【Package Including／清單】
- 1pcs Arducam IMX219 Low Distortion Camera Module for NVIDIA Jetson Nano
- 1pcs 1.0mm pitch 15cm 15pin FPC cable
This Arducam IMX219 camera module is mainly designed for NVIDIA® Jetson Nano. The highlight of this camera is its very low distortion (<3%) of the lens.
這款 Arducam IMX219 攝像頭模塊主要為 NVIDIA® Jetson Nano 設計。這款相機的亮點是鏡頭畸變極低（<3%）。
NOTE: This camera is released for official Jetson Nano/Xavier NX boards. It can also be used on the Raspberry Pi Compute Module (like CM3, CM3+), but it does not support the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4) and other third-party boards.／
注意：此相機是為官方 Jetson Nano/Xavier NX 板發布的。也可以在樹莓派計算模塊（如CM3、CM3+）上使用，但不支持標準樹莓派機型（如樹莓派3/3B+/4）等第三方闆卡。
【Features／特徵】：
- Shutter Type: Rolling Shutter
- Color Type: Color
- IR Sensitivity: Visible light, Integral IR Filter／紅外靈敏度：可見光，集成紅外濾光片
- Interface: MIPI
- Format: RAW Bayer
- Platform Support: Jetson Nano
【Specification／規格】：
- Sensor type: IMX219
- Optical Size: 1/4 inch
- Lens spec: EFL: 2.8mm, F.NO: 2.8, View Angle: 75 Deg. (Horizontal)
- Frame Rate: 21fps@8MP, 30fps@1080p, 120fps@720p
- Interface Type: 2-Lane MIPI
- Output format: RAW10
【Applications／應用】：
- Unmanned Aerial Vehicles (UAVs)／無人駕駛飛行器
- Building Drones／建造無人機
- Autonomous Robotic Systems／自主機器人系統
- Mobile Medical Imaging／移動醫學影像
- intelligent Video Analytics (IVA)／智能視頻分析
