※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Full galvanic isolator between SBC/DAC.
Unit will work on both master and slave DACs. We have isolated the i2c, gpios.
We recommend to use LIFEPO4 batteries, and the Isolator will in turn provide 5v/0.6A using LT3042 and 3.3V/250mA using LT3042 LDOs.
SBC / DAC之間的全電流隔離器。
單元將工作在主DAC和從DAC。我們已經隔離了i2c，gpios。
我們建議使用LIFEPO4電池，隔離器依次使用LT3042和3.3V / 250mA使用LT3042 LDO提供5v / 0.6A。
****************************************
Compatibility
Compatibility: RPI and Sparky, Boss DAC and other DACs (please check manual), Kali
PSU: Isolator needs 6.2-12V minimum. We recommend using our battery holder. In return, Isolator will feed power to above stages (like DACs) using the best LDOs in the market LT3042
If no power is fed to isolator, then you can feed your isolator from stage above (max 5.5V) either powered DAC or Kali
Not Working With: DigiOne (double isolation is not required since DigiOne already has isolation after WM8805/SBC)
兼容性：RPI和Sparky，Boss DAC和其他DAC（請檢查手冊），Kali
PSU：隔離器最低需要6.2-12V。我們建議您使用我們的電池座。作為回報，Isolator將使用市場上最好的LDO將功率供給上級（如DAC）
如果沒有電源供給隔離器，那麼您可以將隔離器從上方（最大5.5V）供電，或者使用DAC或Kali
不使用：DigiOne（雙重隔離不需要，因為DigiOne在WM8805 / SBC之後已經隔離）
****************************************
特徵
Full galvanic isolator between SBC/DAC
Works on both master and slave DACs
We have isolated the i2c, gpios
We recommend to use LIFEPO4 batteries, and the Isolator will in turn provide 5v/0.6A
using LT3042 and 3.3V/250mA using LT3042 LDOs
SBC / DAC之間的全電流隔離器
適用於主DAC和從DAC
我們已經隔離了i2c，gpios
我們建議使用LIFEPO4電池，隔離器依次使用LT3042和3.3V / 250mA使用LT3042 LDO提供5v / 0.6A
****************************************
技術規格
直流連接器尺寸 2.5mm x 6.5mm
配合插頭尺寸 2.5mm x 5.5mm
****************************************
Support & Downloads
