《 HIGHPI案例功能清單》

• 高品質ABS塑料外殼，在加拿大設計製造
  High quality ABS plastic case, designed and made in Canada
• 業界領先的易用性，快速的免工具組裝和拆卸
  Industry-leading ease of use, rapid tool-free assembly and disassembly
• 用於HAT，分支板或散熱器的較大內部容積
  Large internal volume for HATs, break-out boards, or heat sinks
• 兩側的通風孔是通行電纜端口的兩倍
  Vents on three sides double as fly-through cable ports
• HAT板I / O的A / V側兩部分分線
  Two-section breakout on A/V side for HAT board I/O
• 相對於A / V側的大通風口允許GPIO帶狀電纜通過
  Large vent opposite A/V side allows GPIO ribbon cable pass-through
  
• Micro SD卡訪問端口
  Micro SD card access port
  
• 安裝選項1：兩顆M3.5 / M3 /＃6螺釘滑入壁掛支架
  易於拆卸，水平方向，A / V面朝下，間距40mm
  Mounting option 1: two M3.5/M3/#6 screws slide into wall mounts
  for easy removal, horizontal orientation with A/V side down, 40mm spacing
  
• 安裝選項2：從內部穿過底腳的四顆M3.5 / M3 /＃6螺釘
  牢固安裝在任何方向，間距68.3 x 38.8mm
  Mounting option 2: four M3.5/M3/#6 screws through feet from inside for
  secure mounting in any orientation, 68.3 x 38.8mm spacing
  
• 包括自粘橡膠腳，一套4個
  Self-adhesive rubber feet included, set of 4
  
• 啞光飾面隱藏指紋
  Matte finish hides fingerprints
  

《尺寸》

• 外部尺寸：97 x 66 x 41mm
• 分支板的內部體積：90 x 60 x 28.8mm
•