產品說明0

※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

 Pixy2 CMUcam5 影像辨識模組(Arduino相容) SEN-14678／SEN265

【新版本圖片】

    The Pixy2 CMUcam5 is smaller, faster and more capable than the original Pixy. Like its predecessor, the Pixy2 can learn to detect objects that you teach it, just by pressing a button. Additionally, the Pixy2 has new algorithms that detect and track lines for use with line-following robots. With these new algorithms, you can detect intersections and “road signs” as well. The road signs can tell your robot what to do, such as turn left, turn right, slow down, etc. The best part is that the Pixy2 does all of this at 60 frames-per-second, so your robot can be fast, too!

    No need to futz around with tiny wires — the Pixy2 comes with a special cable to plug directly into an Arduino and a USB cable to plug into a Raspberry Pi, so you can get started quickly. No Arduino or Raspberry Pi? No problem! The Pixy2 has several interfaces including SPI, I2C, UART, and USB with simple communications, so you get your chosen controller talking to the Pixy2 in short order.

    The Pixy2 uses a color-based filtering algorithm to detect objects. Color-based filtering methods are popular because they are fast, efficient, and relatively robust. Pixy2 calculates hue and saturation of each RGB pixel from the image sensor and uses these as the primary filtering parameters. The hue of an object remains largely unchanged with changes in lighting and exposure. Changes in lighting and exposure can have a frustrating effect on color filtering algorithms, causing them to break. Pixy2’s filtering algorithm is robust when it comes to lighting and exposure changes.

INCLUDES

• 1x Pixy2 CMUcam5
• 1x Pixy IO to Arduino ISP Cable
• 1x Micro USB Cable
• 1x Mounting Hardware

FEATURES

• Processor: NXP LPC4330, 204 MHz, dual core
• Image sensor: Aptina MT9M114, 1296×976 resolution with integrated image flow processor
• Lens field-of-view: 60 degrees horizontal, 40 degrees vertical
• Power consumption: 140 mA typical
• Power input: USB input (5V) or unregulated input (6V to 10V)
• RAM: 264K bytes
• Flash: 2M bytes
• Available data outputs: UART serial, SPI, I2C, USB, digital, analog
• Integrated light source, approximately 20 lumens
• Dimensions: 1.5” x 1.65” x 0.6”
• Weight: 10 grams

 

機器人視覺更容易

 

    Pixy2比原來的Pixy更小，速度更快，功能更強大。就像它的前身一樣，Pixy2只需按下一個按鈕即可學會檢測您教授的物體。此外，Pixy2還有新的算法，可以檢測和追踪與線路跟隨機器人一起使用的線路。新算法還可以檢測交叉路口和“道路標誌”。道路標誌可以告訴你的機器人做什麼，例如左轉，右轉，減速等。而Pixy2以每秒60幀的速度完成所有這些工作，因此你的機器人也可以快速完成。

    使用Pixy2處理大量不同的應用程序，找到一個項目，或者將Pixy2用於沒人考慮的事情！

直接連接到 Arduino 或 Raspberry Pi

打開軟件和硬件

想深入挖掘？Pixy2完全是開源的 - 軟件，固件和硬件。我們還提供有用的wiki，支持論壇和 郵件支持。

Installing PixyMon for...

 

相關文件

 

 

問與答