產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Arducam Fisheye Camera for Raspberry Pi with M12 Lens, 5MP OV5647 1080P Camera Module for Raspberry Pi 4, 3, 3B+
適用於帶 M12 鏡頭的 Raspberry Pi 的 Arducam 魚眼相機，適用於 Raspberry Pi 4、3、3B+ 的 5MP OV5647 1080P 相機模
B0055，原廠 M12*高0.5 OV5647攝像頭 1080P魚眼鏡頭－LS-40180 樹莓派 Pi3、Pi4
Package Including:
- 1pcs Raspberry Pi Camera Board /w M12x0.5 mount LS-40180 Fish Eye Lens
- 1pcs 15cm 15-pin flat ribbon cable
- NOTE:Raspberry Pi NOT INCLUDED
The Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. ／Raspberry Pi 攝像頭模塊是為 Raspberry Pi 定制設計的附加組件。它通過板上表面上的兩個小插座之一連接到 Raspberry Pi。該接口使用專用的 CSI 接口，該接口專為連接攝像機而設計。CSI 總線具有極高的數據速率，並且專門承載像素數據。
The board itself is tiny, at around 36mm x 36mm highlight of our module is that the Lens is replaceable compared to official one, making it perfect for mobile or other applications where size and image quality are important. It connects to Raspberry Pi by way of a short ribbon cable. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.／板子本身很小，大約 36mm x 36mm 我們模塊的亮點是鏡頭與官方鏡頭相比是可更換的，非常適合移動或其他對尺寸和圖像質量很重要的應用。它通過一根短帶狀電纜連接到 Raspberry Pi。相機通過 CSI 總線連接到 Pi 上的 BCM2835 處理器，CSI 總線是一種更高帶寬的鏈路，可將像素數據從相機傳回處理器。該總線沿著將相機板連接到 Pi 的帶狀電纜運行。
The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.／傳感器本身俱有 5 兆像素的原始分辨率，並具有板載定焦鏡頭。在靜態圖像方面，該相機能夠拍攝 2592 x 1944 像素的靜態圖像，並且還支持 1080p30、720p60 和 640x480p60/90 視頻。
The camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system.／最新版本的 Raspbian 支持該相機，這是 Raspberry Pi 的首選操作系統。
Features:
- Raspberry Pi HD Camera
- High-Definition video camera for Raspberry Pi 4B, Pi 3B+, Pi 3B, Pi 2, Model A/B/B+.
- Omnivision 5647 sensor in a fixed-focus module with replaceable Lense
- Lens holder: M12x0.5 or CS Mount
- 5MPixel sensor
- Integral IR filter
- Still picture resolution: 2592 x 1944
- Max video resolution: 1080p
- Max frame rate: 30fps
- Size: 36 x 36 mm
- Connection by flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector S5 on Raspberry Pi computer board
- Visit www.ArduCAM.com for more wide angle fish eye lenses and get technical support.
- The Camera Lens for Raspberry Pi Camera Board is LS-40180 Fish Eye
- The LS-40180 Lens
Specification ：http://www.uctronics.com/download/LS-40180.pdf -
- Notice: You can use libcamera apps to fetch pictures on Bullseye system. If you want to use raspistill, you need to reconfigure: sudo raspi-config. Enter the system options and enable legacy. After rebooting, you can use raspistill command.／注意：您可以使用 libcamera 應用程序在 Bullseye 系統上獲取圖片。如果要使用 raspistill，需要重新配置：sudo raspi-config。輸入系統選項並啟用舊版。重新啟動後，您可以使用 raspistill 命令。
