產品說明0

※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

　　ArduCAM-M-2MP-Plus is update version of ArduCAM-M-2MP, and is a high definition 2MP SPI camera, which reduce the complexity of the camera control interface. It integrates 2MP CMOS image sensor OV2640, and provides miniature size, as well as the easy to use hardware interface and open source code library. The ArduCAM mini can be used in any platforms like Arduino, Raspberry Pi, Maple, Chipkit, Beaglebone black, as long as they have SPI and I2C interface and can be well mated with standard Arduino boards. ArduCAM mini not only offers the capability to add a camera interface which doesn’t have in some low cost microcontrollers, but also provides the capability to add multiple cameras to a single microcontroller.
ArduCAM-M-2MP-Plus是ArduCAM-M-2MP的升級版，是一款高清2MP SPI攝像頭，降低了攝像頭控制接口的複雜度。它集成了2MP CMOS圖像傳感器OV2640，並提供微型尺寸，以及易於使用的硬件接口和開源代碼庫。ArduCAM mini 可用於任何平台，如 Arduino、Raspberry Pi、Maple、Chipkit、Beaglebone black，只要它們具有 SPI 和 I2C 接口，並且可以與標準 Arduino 板很好地配合。ArduCAM mini 不僅能夠添加一些低成本微控制器所沒有的攝像頭接口，還能夠將多個攝像頭添加到單個微控制器中。

【Application／應用】:

• IoT cameras　／物聯網相機
• Robot cameras　／機器人相機
• Wildlife cameras　／野生動物相機
• Other battery-powered products　／其他電池供電產品
• Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms／可用於MCU、樹莓派、ARM、DSP、FPGA平台

• 2MP image sensor OV2640
• M12 mount or CS mount lens holder with changeable lens options
• Onboard 8MByte frame buffer
• IR sensitive with proper lens combination
• I2C interface for the sensor configuration
• SPI interface for camera commands and data stream
• All IO ports are 5V/3.3V tolerant
• Support JPEG compression mode, single and multiple shoot mode, one time capture multiple read operation, burst read operation, low power mode and etc.
• Well mated with standard Arduino boards
• Provide open source code library for Arduino, STM32, Chipkit, Raspberry Pi, BeagleBone Black
• Small form of factor
• Output Format: RAW, YUV, RGB, JPEG

 

產品圖片

相關文件

 

相關資訊

問與答