| | | | |
產品說明0 SBC8100 OMAP3530 Single Board Computer SBC8100 Plus is now available with DM3730 CPU board Mini8510! Mini8510 hardware fully compatible with Mini8100!
Migrate from the OMAP3530 to DM3730! - TI OMAP3530 Processor based on 600MHz ARM Cortex-A8 core (SBC8100)
- TI DM3730 Processor based on 1GHz ARM Cortex-A8 core (SBC8100 Plus)
- Memory supporting Up to 256MByte DDR SDRAM + 256MByte NAND Flash
- UART, USB, Ethernet, WiFi/Bluetooth, GPS, Camera, Audio, SD, Keyboard,...
- Supports 24-bit TFT LCD, VGA, S-Video/TV Output Display
- Ready-to-Run Linux2.6.29 and WinCE 6.0 (SBC8100)
- Ready-to-Run Linux2.6.32 and WinCE 6.0 (SBC8100 Plus) Hardware Features Mechanical Parameters CPU Board (Mini8100 for SBC8100, Mini8510 for SBC8100 Plus) Processor - TI OMAP3530 microprocessor for SBC8100, 600MHz ARM Cortex-A8 Core, 412MHz TMS320C64x+ DSP Core (compatible with TI OMAP35x series processors)
- TI DM3730 DaVinci Digital Media Processor for SBC8100 Plus, 1GHz ARM Cortex-A8 Core, 800-MHz TMS320C64x+™ DSP Core (pin-to-pin compatible with TI AM3715)
Memory Onboard Headers and Signals Routed to Pins - 12-bit Camera interface (30-pin FPC connector, support CCD or CMOS camera)
- 1-channal 4-wire JTAG interface (10-pin 1.0mm pitch connector)
- 6 LEDs (programmable status LEDs, on CPU board)
- 2-channel SPI
- GPMC bus (16-bit data bus, 10-bit address bus, 4 chip-selection signals and several control signals)
- 3-channel 5-wire UARTs
- 1-channel ULPI (USB1 HS)
- Audio in/out
- 1-channel I2C
- 2-channel McBSP (McBSP1 and McBSP3, McBSP3 is multiplex with UART2)
- 2-channel SD/MMC: MMC1 (8-wire), MMC2 (4-wire)
- 24-bit DSS interface
Expansion Board Audio/Video Interfaces Data Transfer Interfaces and Other Facilities - 10M/100M Ethernet port
- 1 three-wire RS232 Debug serial port
- 4 High-speed USB2.0 Host ports
- 1 High-speed USB2.0 OTG port (Can be only used as USB Device at present)
- WiFi/Bluetooth Module (WG7210, Bluetooth can only used for data transmitting at present)
- GPS Module
- SD/MMC card slot
- 4 Buttons (Boot, Reset, User, On/Off)
- 4*5 keyboard interface
- Expansion interface (2.0mm 30-pin SMT Female Pin Header, UART, I2C, SPI, ADC_IN, PWN_OUT are led out from this connector)
Software Features Note: WiFi/Bluetooth function is not working on SBC8100 Plus yet. OS | Item | Feature | Description | Linux | Boot | Version | X-loader-1.41 U-boot 1.3.3 | Boot Mode | Boot Linux from SD card, NAND Flash or Ethernet | Image update | Support updating image from SD card or Ethernet | Logo update | Support updating logo | Kernel and drivers | Version | Linux 2.6.29 (SBC8100)
Linux 2.6.32 (SBC8100 Plus) | File system Format | Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS file systems | Driver | Serial, RTC, Net, Flash, LCD, Touch screen, S-Video, TV out, VGA, Audio In/Out, SD, USB Host, USB OTG, Keypad, WiFi, GPS, LED | File system | Format | Ramdisk File System, UBI File System | Function | Provided Lib (ALSA -lib, tslib, glibc), udev support | Demo | Android | Google developed a platform based on Linux open-source mobile phone operating system. | DVSDK | Support MPEG4, MPEG2, H264, mp3, aac audio/video formats and Codecs | WinCE | Boot | Version | x-load-1.41, eboot | Boot Mode | Boot WinCE from SD card, NAND Flash or Ethernet | Image update | Support updating image from SD card or Ethernet | System | Characteristic | KITL kernel debug, Reboot, Watchdog, RTC | Driver | Serial, RTC, Net, Flash, LCD, Touch screen, S-Video, TV out, VGA, Audio In/Out, SD, USB OTG, USB Host, Keypad, WiFi/BT, GPS, LED, VRFB, DSPLINKK/CMEMK, PWM, ADC, GPIO/I2C/SPI/MCBSP | Function | Power Management (backlight drive, battery-driven, sleep/wake-up function) | Hive registry support | ROM file system support | Software features | Mediaplayer 9.0, Word and Internet Explorer 6.0 | .NET Compact Framework 3.5 | General Description Embest SBC8100 Single Board Computer is a high-performance controller board based on Texas Instruments’ OMAP3530 microprocessor introduced by Embest after Devkit8000 evaluation board. It is designed based on the Mini8100 CPU board which integrates an OMAP3530 microcontroller, 256MByte DDR SDRAM, 256MByte Nand Flash, RTC, LEDs and one Camera interface on board. The Mini8100 is connected with SBC8100 expansion board through two 1.27mm space 2*45-pin dip connectors.
The SBC8100 Plus integrates Mini8510 as the CPU board which compatible with Mini8100 but using TI's DM3730 as its CPU core board. This is convenient for customers who used SBC8100 or Mini8100 before to upgrade to SBC8100 Plus or Mini8510 so as to migrate from the OMAP3530 to DM3730 for their embedded designs.
In addition to those features provided by the CPU board, the expansion board has exposed many of other features of the OMAP3530 or DM3730. It has integrated RS232, USB, Ethernet, WiFi/Bluetooth, GPS, Audio In/Out, Keyboard, LCD, VGA, S-Video/TV out, SD card and more other functions on board. So many hardware resources provided by the expansion board, it becomes a solid reference board for customer design. Embest also offers a complete software development package to customers. The board supports linux 2.6 and WindowsCE 6.0 operating systems and is provided with complete basic drivers which enable a quick channel to evaluate the TI OMAP3530 or DM3730 processor and customize application software. It would be an ideal development platform for multimedia and communication applications. Other Relative Documents and Links SBC8100 board overview Embest Mini8510 Processor Card Embest Mini8100 Processor Card TI DM3730 datasheet TI OMAP3530 datasheet Customer Design Service Embest also offers customer design service based on the SBC8100 board according to customer’s requirement. Whether you need to reduce, add or modify to existing hardware, Embest will help customers with expert competence and rich experience. | | |